Abstract illustration on a navy background with the article title: Handling Units and Packing Instructions in IFS Cloud

Independent IFS Cloud practice · Shipping and packing design

Design the packing instruction once, so every pallet is described the same way

A handling unit in IFS Cloud is a collective name for all types of containers in which parts can be packed, and a handling unit structure describes the packing as done in one or several levels for pallets, boxes and parts. If the structure is built by hand for each shipment and no packing instruction is designed, the content of a pallet and the labels on it differ between shipments. The stake is handling unit structures, SSCC numbers and labels that do not match the physical shipment. This article follows the 26R1 page on handling units, whose body text is identical in the 25R2 tree, and the activity pages on packing instructions, SSCC and labels.

Key takeaways

  • Packing can be performed manually or automatically, and a predefined packing instruction can build up the entire handling unit structure from the bottom up, including handling unit accessories.
  • A packing instruction is a template for how handling units are connected; the first node entered becomes the root node, and a packing instruction can only have one root node.
  • Packing according to a packing instruction first packs the part by handling unit capacity for the handling unit type on the lowest level, and then applies the parent levels.
  • A handling unit is identified internally by a unique ID; an SSCC or an alternative label can be added.
  • For automatic packing, it is only the Mix of Lot Batch Numbers Blocked option that has an effect, and only when it is enabled on the lowest level.
  • Serial tracked or Lot/Batch tracked parts cannot be used as Packaging Material Parts.

1.What is a handling unit, and what does the structure describe?

A handling unit is a container in which parts can be packed, and a handling unit structure describes the packing across one or several levels for pallets, boxes and parts. The page states that you should not use the handling unit functionality if you are not labelling the handling unit with a unique identifier. For different pack sizes of a part with the same GTIN, it says the Input UoM functionality should be used instead.

The handling unit capacity is defined for a part (or storage requirement group) and a unit of measure. The page gives the example that the capacity for a part could be 100 pcs on a pallet, while the same part with 10PK as unit of measure on another site could have a capacity of 10 "10PK".

2.How is packing done, manually and automatically?

The packing process can be performed either manually or automatically. It is also possible to pack according to a predefined packing instruction, building up the entire handling unit structure from the bottom up, including handling unit accessories.

The default packing instruction can be set for a capacity requirement group, for a global part number, a part number/site, a part number/site/customer or a part number/site/customer/address combination. In the shipment type it can be defined that pack according to packing instruction is performed at the execution of a main activity in the shipment flow, for example reservation, report picking or delivery. For inventory, the part to be packed must have handling unit = 0 and have a quantity available, and pack according to packing instruction must be applied on records stored in the same location.

3.What is a packing instruction?

A packing instruction defines how one or more handling units are connected to each other, and can be described as a template informing the user how to pack. The first node entered becomes the root node, and a packing instruction can only have one root node. At least one handling unit type must be defined in the basic data. The nodes are connected to each other with the parent node field, or the connection to the parent is made automatically with the Add Sub Handling Unit option. The user can define that the packing should be filled up with empty handling units.

The Handling Units page gives an example of a packing instruction, shown in the table.

Level Handling unit Content in the example
Top Pallet Four big boxes can be stored on the pallet
Middle Big box Two small boxes can be stored in each big box
Lowest Small box The reference to the part is made through the handling unit capacity for the lowest level handling units

Per level of the packing instruction it is also possible to define rules regarding a mix of parts, lot batches or condition codes. These rules are validated when performing manual packing.

4.How does packing according to a packing instruction proceed?

The Pack According to Packing Instruction activity first packs the part according to the handling unit capacity for the handling unit type defined on the lowest level of the chosen packing instruction. The parent levels in the packing instruction are applied afterwards. The page on handling units adds that the associated packaging material parts are consumed (issued) from a location using the same backflush principle as in manufacturing. For a handling unit type with additive volume, the volume of the handling unit is dynamic and defined by the content attached to it.

The packing proposal is a separate tool and is described in the IFS Cloud packing proposal. The shipment order that carries the packed handling units is described in the shipment order in IFS Cloud, and consolidation of deliveries in consolidated shipment in IFS Cloud.

5.How are handling units identified?

The handling unit is identified internally via a unique handling unit ID. Alternative identification can be achieved via an SSCC, which can be created for all levels, and another option is to create an alternative handling unit label.

The page on creating an SSCC for a handling unit adds the prerequisites: the company prefixes and extension digits for each handling unit type should be predefined, and the Generate SSCC option should, in some scenarios, be enabled. The page does not say which scenarios. The SSCC is printed on the handling unit label, the handling unit content label and the shipment handling unit label, and it can also be sent using the EDI message service.

6.How are labels printed?

The setting for printing shipment handling unit labels can be maintained on the handling unit type and in the packing instruction. It is possible to print a label for a specific handling unit no matter whether the Print Shipment Handling Unit Label setting is enabled or not. The shipment handling unit label contains information about sender address, receiver address, transport instructions, delivery note number, number of handling units and the total weight for the handling units. Scanning and label work at the dock are covered in warehouse data collection design, and the documents created by shipping in shipping goods and assets in IFS Cloud.

7.How do tracked parts and mixed lots behave in handling units?

When parts are packed manually, it is allowed to mix different parts, lot batches and serials. For automatic packing, only the Mix of Lot Batch Numbers Blocked option has an effect, and only when it is enabled on the lowest level. Serial tracked or Lot/Batch tracked parts cannot be used as Packaging Material Parts. The decisions on tracked parts themselves are in lot and serial tracking decisions in IFS Cloud.

8.Who designs the packing instruction?

A template that nobody at the dock recognises produces structures that nobody can reproduce. The dock lead and the shipping coordinator define the handling unit types and the levels of each instruction, because they know how a pallet is built and which boxes sit in it. Warehouse and quality decide the mix rules per level and whether the Mix of Lot Batch Numbers Blocked option is enabled on the lowest level. Shipping decides where the print setting is kept, on the handling unit type or in the packing instruction. Whoever owns the company prefixes decides the prefixes and extension digits for each handling unit type, because the SSCC needs them. The default packing instruction is assigned by the owner of the part master at one of the five key levels the page lists.

9.How do you test packing before go-live?

Test with one shipment per packing instruction, and write down the expected structure, SSCC and label before packing.

Scenario Expected result Owner
Pack according to the three-level example instruction Lowest level packed first by handling unit capacity, then the parent levels Dock lead
Part to pack has a handling unit other than 0 or no quantity available Prerequisite not met; record the result Dock lead
Instruction with fill-up with empty handling units Packing filled up with empty handling units Dock lead
Create an SSCC for a handling unit type without prefix and extension digits Prerequisite not met; record the result Shipping coordinator
Print a label for one handling unit with the print setting disabled The label can be printed Shipping coordinator
Automatic packing of two lots, option Mix of Lot Batch Numbers Blocked enabled on the lowest level Lots are not mixed Warehouse lead
Manual packing of two lots in one handling unit Allowed, unless a mix rule on the level blocks it Warehouse lead

10.What does a handling unit set-up checklist contain?

The handling unit set-up is ready for go-live when each check below has a record behind it.

  1. Handling unit types are defined in the basic data, with capacity per part and unit of measure.
  2. Each packing instruction has one root node and its levels are written down.
  3. Default packing instructions are assigned at the key levels that are used.
  4. The shipment type that runs pack according to packing instruction is decided.
  5. Company prefixes and extension digits exist for each handling unit type that needs an SSCC.
  6. The label print setting is decided on the handling unit type and in the instruction.
  7. The seven test scenarios are recorded with evidence.

11.Frequently asked questions

What is a handling unit in IFS Cloud?

A handling unit in IFS Cloud is a collective name for all types of containers in which parts can be packed. The purpose of a handling unit structure is to describe the packing as done in one or several levels for pallets, boxes and parts.

What is a packing instruction?

A packing instruction in IFS Cloud defines how one or more handling units are connected to each other, and can be described as a template informing the user how to pack. The first node entered becomes the root node, and a packing instruction can only have one root node.

In which order does packing according to a packing instruction build a handling unit structure?

Pack According to Packing Instruction in IFS Cloud first packs the part according to the handling unit capacity for the handling unit type on the lowest level of the chosen packing instruction. The parent levels of the packing instruction are applied after that.

What does an SSCC need to be created?

To create an SSCC for a handling unit in IFS Cloud, the company prefixes and extension digits for each handling unit type should be predefined. The Generate SSCC option should also, in some scenarios, be enabled; the documentation does not list the scenarios.

Can tracked parts be used as packaging material?

Serial tracked or Lot/Batch tracked parts cannot be used as Packaging Material Parts in IFS Cloud handling units.

12.About the author

Dariusz Myśliwiec: 18 years hands-on with IFS, including IFS Cloud. Based in Kraków, delivering remotely across Europe and globally through an independent practice. You talk to the consultant who does the work, not a sales layer.

IFS is a registered trademark of IFS AB; this practice is not affiliated with IFS AB.

Are your pallets and boxes described differently from one shipment to the next?

A review of handling unit types and packing instructions against the way your dock packs shows which levels, labels and SSCC settings need a decision.

Book a packing instruction review Read about lot and serial decisions